Symphonic SF225B Hints For Timer Recording, To Stop A Started Automatic Timer Program

TIMER RECORDING

You may set the VCR to start and end time for a record- ing while you are away. You can set seven programs to record on specific days, daily or weekly within a 1 year period.

1)Insert a tape with its safety tab into the VCR.

2)Select main menu by pressing the MENU button.

3)Select "TIMER PROGRAMMING" by pressing the ▲ or ▼ button. Then, press the B button.

●If you have not yet set the clock, "CLOCK SET" ap- pears. If so, follow the steps [3] and [4] in "CLOCK SET UP " section. Then, set the timer recording.

4) Set the timer.

Set the program number (1~7)

	PROGRAM NUMBER 4
Program number which is not set up flashes. DATE		- - / - -	- -
Press the ▲ or ▼ button repeatedly	START TIME	- - : - -
	END TIME	- - : - -	- -
for the desired program number.	CHANNEL	- -
	REC SPEED	- -
Then, press the B button.
Select once, daily or weekly recording
For once: Press the ▲ or ▼ button
to point to "ONCE".	PROGRAM NUMBER 4
For daily (Monday~Friday):	ONCE
Press the ▲ or ▼ button	DAILY
	WEEKLY

to point to "DAILY".

For weekly: Press the ▲ or ▼ button to point to "WEEKLY".

Then, press the B button.

Set the date

First, press the ▲ or ▼ button for the month, then, press the B button.

Next, press the ▲ or ▼ button for the day. Then, press the B button.

Set the start time

First, press the ▲ or ▼ button for the hour, then, press the B button.

Next, press the ▲ or ▼ button for the minute, then, press the B button.

And then, press the ▲ or ▼ button for AM or PM. Then, press the B button.

Set the end time

Follow the instructions of "Set the start time" to set the end time.

Set the channel number
Press the ▲ or ▼ button repeatedly
for the desired channel number.	�
Then, press the B button.

If you connected the VCR to a cable box or satellite box as in "Basic connections" on page 6, select the VCR to channel 3 or 4 the same channel as the CH3 or CH4 switch on the back of the VCR. Then, select the channel you want to record at the cable box or satellite box. Leave the cable box or satellite box on for timer recording.

	ONE TIME PROGRAM
Set the tape speed	PROGRAM NUMBER 4
Press the ▲ or ▼ button repeatedly	DATE	05/03 THU
	END TIME	08:30	PM
	START TIME	07:30	PM
for the desired tape speed.	CHANNEL	16
	REC SPEED	SP
Then, press the B button.		SP
		SLP

●To go back one step, press the s button.

5)To set another program, repeat step [4]. To exit, press the RESET/EXIT button.

6)Press the POWER button to set the timer. The TIMER indicator on the VCR comes on.

HINTS FOR TIMER

RECORDING

●If there is a power failure or the VCR is unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.

●If the tape runs out before the end time, the VCR will switch to the Stop mode immediately, eject the tape and the VCR power will be turned off. The TIMER indicator will flash.

●If a tape is not in the VCR or does not have the safety tab, the TIMER indicator flashes and timer recording cannot be performed. Please insert a recordable tape.

TO STOP A STARTED AUTOMATIC TIMER PROGRAM

Press the STOP/EJECT button on the VCR.

TO CHECK, CORRECT, OR CANCEL AN AUTOMATIC TIMER PROGRAM

1)Turn the power on.

2)Select main menu by pressing the MENU button.

3)Select "TIMER PROGRAMMING" by pressing the ▲ or ▼ button. Then, press the B button.

4)Select the program number which you want to check by pressing the ▲ or ▼ button. The details of the selected program appears on the TV screen.

●Go to the digit you want to change by pressing the B or s button. Then, enter correct numbers by pressing the ▲ or ▼ button.

●You may cancel the entire program by pressing the s button during the program number flashes.

5)Press the RESET/EXIT button to exit.

6)Press the POWER button to return to timer stand- by mode.

AVOID OVERLAP OF PROGRAMS ...

There is a case that a program will not be performed. When programs overlap:

●The program with the earliest start time has priority.

●Once the earliest program finishes, the overlapping program with the lower number will begin recording in sequence.

●The illustration below demonstrates the sequence of recordings.

Recording Sequence

Program 1 (10:00AM-11:00AM)

Program 2 (9:00AM-10:00AM)

Program 3 (9:30AM-12:00PM)

9:00AM 10:00AM 11:00AM 12:00PM

*Recording period is SHADED

- 11 - EN

0J11