RECORDING FUNCTION
Before recording, make sure:
●The desired channel is selected by pressing the num- ber buttons on the remote control or the CHANNEL Up/Down button. (If you connected the VCR to a cable box or satellite box as in "Basic connections" on page 6, select the VCR to channel 3 or 4 the same channel as the CH3 or CH4 switch on the back of the VCR. Then, select the channel you want to record at the cable box or satellite box. In this case, you can ONLY record and view the SAME channel. )
●There is a tape with its safety tab into the VCR.
●The desired recording speed is selected in SP(stand- ard play) or SLP(super long play) mode by pressing the TAPE SPEED button.
Tape Speed | Recording/Playback Time | |||
| Type of tape | T60 | T120 | T160 |
SP mode | 1 hour | 2 hours | ||
SLP mode | 3 hours | 6 hours | 8 hours | |
VIEWING AND RECORDING
THE SAME PROGRAM
1) Begin the recording by pressing the RECORD button.
●To temporarily stop recording or resume it, press the PAUSE/STILL button. After the VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and the video head.
2)Stop the recording by pressing the STOP button when recording is completed.
OTR(One Touch Recording)
This function enables you to set the recording length sim- ply by pressing the REC/OTR button on the VCR.
1)Begin OTR by pressing the REC/OTR button on the VCR repeatedly until the desired recording length appears.
●Recording stops when 0:00 is reached.
Press | Display | Recorded Length |
1 press | (normal recording) | |
2 presses | 0:30 | 30 minutes |
3 presses | 1:00 | 60 minutes |
↓ | ↓ | ↓ |
|
|
|
17 presses | 8:00 | 480 minutes |
18 presses | (normal recording) | |
- 10 - | EN |
0J11
