Star Micronics TSP400 Series Line Mode, Commands to Select Characters, 1B 62 n1 n2 n3 n4

3-2. Line Mode

Commands to Select Characters

						ENGLISH
Control codes				Hexadecimal	Function
				codes
<ESC> “R”		n		1B 52 n	Select international character set
<ESC> “/” “1”			1B 2F 31		Select slash zero
<ESC> “/” <1>			1B 2F 01
<ESC> “/” “0”			1B 2F 30		Select normal zero
<ESC> “/” <0>			1B 2F 00
<ESC> “b”		n1 n2 n3 n4		1B 62 n1 n2 n3 n4	Select bar code printing
d1 ... <RS>				d1 ... 1E
<ESC> “M”			1B 4D		Select 12-dot pitch printing
<ESC> “p”			1B 70		Select 14-dot pitch printing
<ESC> “P”			1B 50		Select 15-dot pitch printing
<ESC> “:”			1B 3A		Select 16-dot pitch printing
<ESC> <SP> n				1B 20 n	Set character spacing
<SO>				0E	Sets the printing magnified double in
					character width.
<DC4>			14		Resets the printing magnified in
					character width.
<ESC> “W”		n		1B 57 n	Sets the magnification rate in character width.
<ESC> <SO>				1B 0E	Sets the printing magnified double in
					character height.
<ESC> <DC4>				1B 14	Resets the printing magnified in character
					height.
<ESC> “h”		n		1B 68 n	Sets the magnification rate in character height.
<ESC> “i”		n1 n2		1B 69 n1 n2	Sets the magnification rates in character
					width and height.
<ESC> “	–		1B 2D 31
	” “1”				Select underlining
<ESC> “	–			1B 2D 01
	” <1>
–			1B 2D 30
<ESC>“	” “0”				Cancel underlining
<ESC> “	–			1B 2D 00
	” <0>
<ESC> “ _” “1”			1B 5F 31		Select overlining
<ESC> “ _” <1>				1B 5F 01
<ESC> “ _” “0”			1B 5F 30		Cancel overlining
<ESC> “ _” <0>				1B 5F 00

– 8 –