9. Test Print Method
9-1. Producing a Test Print
To start test print, set the power switch to off, set the paper in place, then set the power switch to on while holding down the FEED switch.
When a certain amount of printing is performed, the printer will cut the paper and stop automatically.
An Example of Test Printout
9-2. Hexadecimal Dump
Open the printer cover and set the power switch to on while holding down the FEED switch.After closing the printer cover, printer output will be in hexadecimal format.
The received data is printed as follows.
ENGLISH
Address | Hexadecimal data | ASCII data |
– 21 –
