![](/images/new-backgrounds/1134485/13448531x1.webp)
STEP 19
Feed the Head Phone Jack cable from the PVS display neck through the hole in the front display plastics where the blank cover was removed earli- er.
STEP 20
Now that all the cables are in their places, and con- fined to the post on the display mount. Place the display front plastic onto the back. Make sure the bottom of the display front is under the 2 tabs on the display mount. Press the front display against the round tube and rotate it to the back. Be care- ful not to pinch any wires.
Screws ![](/images/new-backgrounds/1134485/13448531xi2.webp)
STEP 21
Using a #2 Phillips screwdriver, secure the front display to the back with the (8) screws you previ- ously removed and saved.
STEP 22
Take the Entertainment Head Phone Jack from the PVS kit and attach it to the cable that is hanging out of the front of the display. Make sure the con- nector is seated all the way into the jack. Now slide the jack into the front of the display. Using a #2 Phillips screwdriver, fasten the head phone jack into the front display with the screw that was saved from the earlier step.
2
1
Screws
Screw
16 | STAR TRAC PERSONAL VIEWING SCREEN OWNER’S GUIDE |