Star Trac E-TRi, E-STi, E-TBTi, E-RBi, E-UBi manual Headphone Jack Replacement

Headphone Jack Replacement.

When you are experiencing poor audio output from your PVS, you should check the entertainment headphone jack to see if it needs replacement. The headphone jack was designed for an easy and quick replacement. Before you begin, make sure your have the proper replacement part available. For the E-TRi use part number 715-3668. For the E-TBTi, E-STi, E-RBi, and E-UBi use part number 718-5098 .

Headphone Jack

Screw

Look under the Display unit, in the front you will see a printed headphone screw logo. Use a #2 Phillips screwdriver to remove the screw holding the headphone jack in place. Retain the screw for later use.

Gently pull the Headphone jack out of the display.

Be careful, the headphone is connected to a cable.

Disconnect the cable.

Take the new Headphone jack and connect the cable.

Slide new Headphone jack into the Display plastic front, using the screwdriver, re-install the screw.

This completes the Headphone replacement.

STAR TRAC PERSONAL VIEWING SCREEN OWNER’S GUIDE 39