INSTALLING THE ARM PIVOT BRACKET:
1.Locate the six (M12,70MM,Button Head Bolts), six (M12,Washers), ARM BRACKET, & ARM PIVOT BACK PLATE. Align components and tighten bolts using an 8MM hex key.
2.Secure the ARM BRACKET CROSS BRACE to the FRONT TUBING with four (M8, 20MM, Button Head Screw) and four (M8, Washers). Tighten with a 4MM hex key.
INSTALLING THE ARM PIVOT:
1.Place the ARM PIVOT assembly in between the ARM PIVOT BRACKET and align with the PIVOT SHAFT.
2.Install END CAPS as shown with a M8 Washer and (M8, 20MM, Socket Head Screw) on each side. NOTE: Place the END CAP with the red rotational sticker toward the user.
End Cap w/ | Spacer w/ |
Red Sticker | 25mm ID |
Cross
Brace
Back 
Plate
Arm Pivot
Bracket 
Arm
Pivot
Pivot
Shaft
2X M8
Washer
Spacer w/ 8.4mm ID
Page 5
