![](/images/new-backgrounds/1130982/13098217x1.webp)
1.6Connecting NetCam to a Modem
In order to use NetCam with an analog phone line, you will need the
Install the StarDot Tools software by inserting the included
Connect one end of the null model serial cable to the S1 port of NetCam and the other end into an available serial port on your PC.
Connect the round end of the modem cable into the external modem and plug the modem power supply into the modem (modem and modem cable both included with remote package).
Plug the DB9 end of the modem cable into the S0 port of NetCam.
Run the StarDot Tools software and click on the Setup Wizard button.
Follow the steps in the Setup Wizard. When asked for modem type, select 3JTech.
Test your configuration locally first. Once successful, you can place NetCam and the modem remotely and it will automatically dial out to the Internet and upload images according to the set schedule.
External Modem (Included with
Power Supplies (Included)
Plug Into Power/
Modem Cable
and Modem
netcamh. | |
ww |
|
w.s | r |
| do- |
| om |
To Internet via Phone Line & ISP
Modem Cable (Included) Used to connect NetCam to a PC Serial Port for Configuring Camera
Modem/Power Cable
(Included with
to External Modem
NetCam | Page |