Connecting Slave Computers
There are two options for connecting slave computers to SV431DVIUA:
1.a) Using a Male to Male DVI-D (Single Link) cable, connect the computer’s DVI port to one of the four available PC ports (PC 1, PC 2, PC 3, PC 4) as shown below.
b) Using a USB A-B Cable, connect the USB port that corresponds with the PC port used in step 1, to the USB port on the corresponding computer, as shown below.
2.Use a 4-in-1 USB, DVI, Audio and Microphone KVM Switch cable, such as USBDVI4N1A15 to connect each computer to the desired port. For more information, please see Accessory Products from StarTech.com.
Male to Male DVI
One USB patch cable for both keyboard and mouse
Repeat steps 1a and 1b or and 2 to connect the remaining computers to the available ports. Devices and computers that are connected to SV431DVIUA can now be turned on.
Instruction Manual
