StarTech.com SV431H Cascade Configuration, Connection, Computer Selection by Hot Key Command

7

•To adjust the Scan Rate which sets the duration before switching to the next computer in Auto Scan:

Left Ctrl + Left Ctrl + F3

The SV431H sends one to four beeps indicating scan intervals of 3, 8, 15 and 30 seconds respectively.

•To adjust keyboard typematic rate (characters/sec), this setting over-rides that of the BIOS and any operating system:

Left Ctrl + Left Ctrl + F4

The Sv431H generates 1 to 4 beeps corresponding to 10, 15, 20 and 30 characters/sec respectively.

Cascade Configuration

Connection

Before connecting a device (a computer or any other SV431H) to the master under power, you must turn off the devices. Only the PS/2 ports are operable for cascade operation.

Computer Selection by Hot Key Command

The first digit is the port address of the Master unit (1~4) and the second digit is the port address of the Slave (1~4). Please note that only the Master’s PS/2 ports can be connected to a Slave’s Console port.

Left Ctrl + Left ctrl + 1 + 3

Selects a computer connected to PS/2 port 3 of a Slave connected to PS/2 port 1 of the Master.