StarTech.com SV431H user manual Adhesive Rubber Feet, Console Connection, Computer Connection

3

Adhesive Rubber Feet

For desktop operation, you may stick the four round rubber feet (supplied with the unit) to the bottom of the StarView. Do not use the rubber feet with the rack mount option.

Console Connection

Before installation make sure all devices and computers to be connected to the SV431H have been turned off.

Plug you monitor to the console’s VGA port; connect the PS/2 mouse and keyboard to the condole port marked with a mouse and a keyboard as shown in figure below.

Computer Connection

Use a HDB15 male-to-female cable to connect from your computer’s VGA port to the SV431H VGA port as shown on the following page.

•For USB computers: Use a USB A-B cable to connect from one of the SV431H PC ports to the USB port on the corresponding computer (series A connector), as shown on the following page.