StarTech.com SV431USB power supply added, sources to the StarView, not keyboard or mouse

		12
	initialization.	than 1A current rating to
	When StarView	the StarView switch
	switch works under	Be sure the USB cable
	self-power, i.e., no	is well seated to ensure
	power supply added,	communication.
	it supports max of	Remove all power
	100mA as per USB	sources to the StarView
	spec.	by unplugging all USB
		A-B cables and the
		power adapter; then
		start all over again.
		Select the computer by
		pushbutton, restart the
		computer and try again.
Computer	Device initialization	Wait at least 5 seconds
hangs up while	takes too much time.	before computer
switching		switching to ensure
computers.		proper USB
		communication.
		Turn off device driver
		(not keyboard or mouse)
		before computer
		switching.
Auto Scan does	All PCs are off or	Turn computers on.
not switch PC	only one PC is
automatically	turned on. Scan
and StarView	mode works for
beeps.	power-on computers
	only.