Instruction
Manual
11
Snapshots: The Snapshots screen allows you to view and save a screenshot of the
controlled computer in its current state. This screenshot will update pe riodically
(automatically). Saved image files are stored in .PNG for mat.
Logout: Clicking on Logout will terminate your W eb Interface section. To re-initiate the
Web Interface, you will be required to re-enter your user name and password.
VNC: Tolaunch or disconnect a Vir tual Network connecti on with the con trolled computer,
click on Connect or Disconnect as appropriate
Network Config:
DHCP: Automatic network c onfiguration using DHCP is: Enabled/Disabled . This feature
applies only to the LAN port on the rear panel, and is enabled by default. W hen enabled,
the unit will automatically configure itself with an IP address when a DHCP server is
present. When disabled, the LAN port will use the values as signed to it on the IP
Addresses and Routing table below.
IP Addresses and Routing: This ta ble allows you to assign IP information for the LAN
and WAN ports separately. If you are using DHCP, the values for the LAN por t will be
filled in automatically and any changes made will not affect the setup.
Domain Name Server: This section all ows youto s pecify DNS servers and the default
DNS domain suffix in use on the network. If DHCP is enabled, some of these values
may be supplied automatically.