Instruction
Manual
5
SVxx41HDIE offers four distinct methods for config uring the unit for your network. Which
method will work best will depend on your level of experience and your specific net work
configuration.
Please note: Connecting the remote computers prior to following the steps outlined
below can result in system i nstability. Please refrain from connecting the remote
computers, until the local pe ripherals have been connected.
Web Configuration Using the On-Screen Displ ay
Upon boot-up, including following a reset, SVxx41HDIE will display a window on the local
video output (front VGA connector), that will appear as follows:
Assigned IP Address
The initial screen will display the IP address assigned by your existing DHCP server (if
present on your network). If no DHCP server is detected, a factory assigned IP address
will be displayed in its place (10.0.0.15 by default). Please make note of the assigned IP
address, as you will need to enter it into your web browser to access the Web Inter face.
If static IP addresses are assigned, you will likely need to change the Net Mask,IP
Address and other details, prio r to connecting via your We b browser. If this is the c ase,
connect a local PS/2 keyboard and press the Enter key. In order to proceed, you will
require an administrative username and password. By default, the username and
password are admin. Youwill be gi venthe o pportunity to change the password
(recommended) to be performed once the co nfiguration is complete.
Alternatively, you may press the Setup button on the front panel, and you will not be
asked to enter the admin password if you just press Enter.
At the main OSD menu (pictured below), you will be given severalbasic setup optio ns.
Toconfigure SVxx41HDIE to your required network settings, use the Net work Setup
Wizard. Toselect from the menus pr ovided, use the arrow keys on your keyboard. At