StarTech.com USBDUP15 Utility, System Information, Do Format, FAT Format, 6.1.3 FAT32 Format

5.2 System Information

This function will show information about the system, including model number and software version.

6. Utility

6.1 Do Format

Insert a Flash drive device into one of the destination slots and press OK to begin formatting.

1.This function will automatically detect the capacity of the Flash drive and format accordingly. If the Flash drive is already FAT16 or FAT32, the original format will not be changed.

2.If the Flash drive’s format is NTFS, Linux, or multi-partition FAT, the system will format the drive according to the capacity. If the capacity is equal or greater than 2GB, it will format to FAT32. If the capacity is less than 2GB, it will format to FAT16.

3.During the format process, you can press the up and down arrows to check each Flash drive’s formatting status, progress, and information.

6.1.2 FAT Format

Format any Flash drive to FAT16.

6.1.3 FAT32 Format

Format any Flash drive to FAT32.

NOTE: Only the Flash drive(s) in the destination ports will be formatted. The source will not be formatted.

Instruction Manual

9