StarTech.com VGA2NTSCPRO manual Troubleshooting, Table of Contents, Technical Specifications

Models: VGA2NTSCPRO

1 6
Download 6 pages 44.27 Kb
Page 3
Image 3
Troubleshooting

8

Troubleshooting

If you are experiencing any difficulties with your converter, first make sure that all cables are firmly seated and connected to their proper ports.

No video output.

Make sure the power is turned on. Your computer screen will still have a display even if the converter is turned off, but you will not have a display on the TV unless the converter is powered on.

Make sure that your television is on the proper “Video Input” channel. Consult the television manufacturer’s documentation if necessary.

Make sure that your 15-pin VGA extender cable is attached to the proper ports.

Make sure the Video/RGB and NTSC/PAL settings on the converter are correct. Consult your television manufacturer’s documentation for details on your television’s settings.

If you are connecting from a notebook computer, make sure that the CRT output on your notebook is enabled.

Output on TV is mono (black and white).

Make sure the NTSC/PAL setting on the converter is correct. Consult your television manufacturer’s documentation for details on your television’s settings.

Make sure the color or saturation setting on your TV is not minimized.

There is a line flicker on the TV.

• Adjust the Sharpness settings to find an appropriate level for your system.

My TV doesn’t have an extra video input connector.

You may need to purchase a special RF Modulator. This device can convert the composite video signal of the converter into an antenna signal that can be read by many older televisions.

1

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Using the On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Using the Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Technical Specifications

Input Signal

VGA

 

 

Horizontal Frequency

25 KHz - 58.464 KHz

 

 

Vertical Frequency

50 Hz - 100 Hz

 

 

Output Signal

Composite video, S-Video, analog RGB video

 

for SCART, computer monitor pass-thru

 

 

Power Supply

9V DC power adapter

 

 

Weight

230g (0.51 lbs)

 

 

Dimensions

Base Unit: 6.50 x 4.13 x 1.02 in. (165x 45x 26mm)

 

Remote: 3.39 x 1.77 x 0.28 in. (86x 45x 7mm)

 

 

Compliance

FCC Class B and CE

 

 

Page 3
Image 3
StarTech.com VGA2NTSCPRO manual Troubleshooting, Table of Contents, Technical Specifications, No video output, Introduction