StarTech.com ZIF2CF instruction manual 1.8in ZIF LIF to Single Compact Flash SSD Adapter Card

Instruction Manual

1.8in ZIF LIF to Single Compact Flash SSD Adapter Card

ZIF2CF

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Packaging Contents

•Compact Flash to ZIF/LIF Adapter

•Instruction Manual

Installation

Compact Flash

Connector

ZIF/LIF Connector

ZIF/LIF Pin #1

Marker

*actual product may vary from photos

WARNING! Computer equipment can be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching your hard drive. StarTech.com recommends that you wear an anti-static strap when installing any computer component. If an anti-static strap is unavailable, discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds. Be sure to handle your hard drive carefully and consult your hard drive and laptop manufacturer for details on how to remove the drive.

WARNING! The ZIF2CF adapter does not support hot-swapping. Please ensure that the host computer is powered down when connecting or disconnecting the Compact Flash card to or from the adapter. Similarly, please ensure that the host computer is powered down when connecting/removing the adapter, when a Compact Flash card is connected to the adapter.

Please note: To simplify installation, power down the computer or ZIF/LIF device into which the adapter will be installed, and remove the existing ZIF/LIF device.

1.With the Compact Flash card label facing upward (visible), align the holes on the connector end of the Compact Flash card you wish to install, with the pins provided by the by ZIF2CF adapter.

2.Apply gentle pressure to the Compact Flash card, until the pins provided by the adapter are fully inserted into the adapter connector holes.

3.Gently, lift the brown lever from the ZIF/LIF connector on ZIF2CF, and insert the ZIF/LIF cable from the device/computer into the ZIF2CF ZIF/LIF connector, such that Pin #1 on the the ZIF/LIF cable is aligned with Pin #1 on the ZIF/LIF connector provided by the ZIF2CF adapter (denoted by white arrow).

For the most up-to-date information, please visit: www.startech.com

Manual Revision: 10/28/2011