Manuals / State Industries / Household Appliance / Water Heater

State Industries GS6 50 YBVIT, 315466-000, 185244-004, GS6 50 YRVIT Table of Contents, Introduction

Models: GS6 50 YBVIT GS6 40 YRVIT GS6 50 YBVIT 2 GS6 40 YBVIT 2 315466-000 GS6 40 YBDS 185244-004 GS6 50 YRVIT

1 32
Download 32 pages 56.77 Kb
Page 4
Image 4

TABLE OF CONTENTS

SAFE INSTALLATION, USE AND SERVICE

2

GENERAL SAFETY

3

TABLE OF CONTENTS

4

INTRODUCTION

4

Preparing for the New Installation

4

INSTALLATION REQUIREMENTS FOR THE

 

COMMONWEALTH OF MASSACHUSETTS

5

TYPICAL INSTALLATION

6-7

LOCATING THE NEW WATER HEATER

8

Facts to Consider About Location

8-9

Insulation Blankets

9

Combustion Air and Ventilation for Appliances

 

Located in Unconfined Spaces

9

Combustion Air and Ventilation for Appliances

 

Located in Confined Spaces

9-10

INSTALLING THE WATER HEATER

11

Water Piping

11-12

Temperature-Pressure Relief Valve

12

Gas Piping

13

Sediment Traps

14

Blower Assembly Installation

14

Vent Pipe Connection to Blower Assembly

15

Venting and Installation

15-16

LIGHTING & OPERATING LABEL

21

TEMPERATURE REGULATION

22

FOR YOUR INFORMATION

23

Start Up Conditions

23

Condensate

23

Smoke/Odor

23

Thermal Expansion

23

Strange Sounds

23

Operational Conditions

23

Smelly Water

23

“Air” in Hot Water Faucets

23

High Temperature Shut Off System

23

PERIODIC MAINTENANCE

24

Venting System Inspection

24

Burner Inspection

24

Burner Cleaning

24

Housekeeping

24-25

Anode Rod Inspection

25

Temperature-Pressure Relief Valve Operation

25

Draining

25

Drain Valve Washer Replacement

25-26

Service

26

LEAKAGE CHECKPOINTS

26

REPAIR PARTS

27

TROUBLESHOOTING

28-30

WARRANTY

31

INTRODUCTION

Thank You for purchasing this water heater. Properly installed and maintained, it should give you years of trouble free service.

Abbreviations Found In This Instruction Manual:

•CSA - Canadian Standards Association

•ANSI - American National Standards Institute

•NFPA - National Fire Protection Association

•ASME - American Society of Mechanical Engineers

•GAMA - Gas Appliance Manufacturer’s Association

•UL - Underwriters Laboratories Inc.

This gas-fired water heater is design certified by Underwriters Laboratories Inc. under American National Standard/CSA Standard for Gas Water Heaters ANSI Z21.10.1 • CSA 4.1 (current edition).

PREPARING FOR THE INSTALLATION

1.Read the “General Safety” section, page 3 of this manual first and then the entire manual carefully. If you don’t follow the safety rules, the water heater will not operate properly. It could cause DEATH, SERIOUS BODILY INJURY AND/OR PROPERTY DAMAGE.

This manual contains instructions for the installation, operation, and maintenance of the gas-fired water heater. It also contains warnings throughout the manual that you must read and be aware of. All warnings and all instructions are essential to the proper operation of the water heater and your safety. Since we cannot put everything on the first few pages, READ THE ENTIRE MANUAL

BEFORE ATTEMPTING TO INSTALL OR OPERATE THE WATER HEATER.

2.The installation must conform with these instructions and the local code authority having jurisdiction. In the absence of local codes, installations shall comply with the National Fuel Gas Code ANSI Z223.1/NFPA 54 and the National Electrical Code, NFPA 70. These publications are available from The National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02269.

3.The water heater when installed must be grounded in accordance with the local codes, or in the absence of local codes: In the United States, the National Electrical Code. ANSI/NFPA 70.

4.If after reading this manual you have any questions or do not understand any portion of the instructions, call the local gas utility or the manufacturer whose name appears on the rating plate.

5.Carefully plan the place where you are going to put the water heater. Correct combustion, vent action, and vent pipe installation are very important in preventing death from possible carbon monoxide poisoning and fires, see Figures 1 and 2.

Examine the location to ensure the water heater complies with the “Locating the New Water Heater” section in this manual.

6.For California installation this water heater must be braced, anchored, or strapped to avoid falling or moving during an earthquake. See instructions for correct installation procedures. Instructions may be obtained from California Office of the State Architect, 400 P Street, Sacramento, CA 95814.

7.Massachusetts Code requires this water heater to be installed in accordance with Massachusetts 248-CMR 2.00: State Plumbing Code and 248-CMR 5.00. For more information see next page.

8.Complies with SCAQMD rule #1121 and districts having equivalent NOx requirements.

4

Page 3 Page 5
Page 4
Image 4
State Industries 315466-000, 185244-004, GS6 50 YRVIT, GS6 50 YBVIT 2, GS6 40 YRVIT Table of Contents, Introduction
Page 3 Page 5

GS6 50 YBVIT, GS6 40 YRVIT, GS6 50 YBVIT 2, GS6 40 YBVIT 2, 315466-000 specifications

State Industries manufactures a variety of high-efficiency water heaters, including the GS6 models, which are designed to meet diverse residential and commercial needs. Among these, the GS6 50 YRVIT, GS6 40 YBDS, and GS6 40 YBVIT 2 stand out for their performance, advanced technologies, and distinctive features.

The GS6 50 YRVIT is a powerful 50-gallon gas water heater that boasts a 40,000 BTU input. This model is designed with a high-efficiency rating, enabling it to deliver a strong hot water supply while minimizing energy costs. Its glass-lined tank provides superior protection against rust and corrosion, ensuring durability and extending the lifespan of the unit. This model also features an innovative flue design that maximizes combustion efficiency, making it an environmentally friendly choice that adheres to stringent energy regulations.

The GS6 40 YBDS, on the other hand, is a more compact 40-gallon gas water heater, also with a 40,000 BTU input. This unit is particularly popular for smaller households or commercial spaces where space is limited. It also incorporates advanced technology to optimize performance while remaining user-friendly. The GS6 40 YBDS is equipped with a direct vent system, allowing for flexible installation options, ensuring that high-efficiency heating is available even in confined areas.

Lastly, the GS6 40 YBVIT 2 model takes energy efficiency a step further with its cutting-edge insulation system and advanced temperature control features. This 40-gallon water heater is specifically engineered to minimize heat loss, which translates into reduced energy expenses for the user. The stainless steel burner and exceptional venting design contribute to efficient hot water production, making the GS6 40 YBVIT 2 a reliable choice for families seeking consistent performance.

Across all GS6 models, State Industries emphasizes safety and reliability. Each unit includes several built-in safety features, such as a temperature and pressure relief valve and a flame arrestor to prevent flammable vapors from entering the burner. Moreover, the easy-to-use digital display allows users to monitor settings effortlessly.

In summary, the State Industries GS6 series, including the GS6 50 YRVIT, GS6 40 YBDS, and GS6 40 YBVIT 2, combines efficiency, cost-effectiveness, and advanced technologies, catering to the hot water needs of any home or business. With their robust construction and innovative features, these water heaters provide dependable service and peace of mind to users.