Operating

This water heater is equipped with an electrically operated venting system and electronic control. For the burner to come on, the water heater thermostat must call for heat. Then the system will begin sequencing, each section prov- ing itself before gas is allowed to flow to the burner.

BEFORE THE WATER HEATER WILL OPERATE:

1.The control system must be connected to a grounded 110/120 volt power supply. The control system has an overall rating of 2 amps. The water heater must be securely and adequately grounded in accordance with local codes and with the latest edition of the National Electrical Code ANSI/NFPA 70.

2.The ON/OFF toggle switch, located on the control box above the thermostat must be in the “ON” position for the electrical control system to operate allowing the gas portion to operate (ignite burner).

3.The gas control knob located on the thermostat must be turned to the “ON” position for the gas to be able to flow.

4.The venting manual reset switch must be in the closed position. See “Venting Manual Reset Switch” in the “For Your Information” section.

5.There is a non-resettable hi-limit switch in the thermo- stat, which must be good (closed) for the thermostat to be operated. See “High Temperature Shut Off System” in the “For Your Information” section.

OPERATION

When the thermostat calls for heat, gas is allowed to flow to a (N/O) pressure switch closing it. An electrical circuit is then made to the blower, turning it on. When the blower

BLOWER MOTOR

VENTING MANUAL

RESET SWITCH

VENTING HOOD

ON/OFF SWITCH

AIR PRESSURE

SWITCH

GAS CONTROL

KNOB

120V GAS VALVE

has achieved sufficient venting, the air pressure switch will close. A 120 volt circuit will be completed through the venting manual reset switch and on to the 120 volt gas valve. The 120 volt gas valve will open allowing gas to

DIAGNOSTIC

INDICATOR

BURNER

flow to the burner. The hot surface ignitor will establish a main burner flame.

GAS THERMOSTAT

HOT SURFACE

IGNITOR

21

Page 20 Page 22
Page 21
Image 21
State Industries Commercial Gas Water Heater instruction manual Operating, Before the Water Heater will Operate, Operation
Page 20 Page 22

Commercial Gas Water Heater specifications

State Industries has carved a niche for itself as a leader in the water heating industry, providing reliable solutions for various commercial applications. One of the standout products in their lineup is the State Industries Commercial Gas Water Heater. This powerhouse is designed to meet the demanding hot water needs of businesses, from restaurants and hotels to schools and hospitals.

One of the primary features of the State Commercial Gas Water Heater is its high efficiency. These units are engineered to deliver optimal performance while reducing energy costs. With innovative technologies such as a power vent system and advanced burner design, they maximize heat transfer and minimize heat loss. This efficiency not only translates to lower operating costs but also a reduced environmental impact, making it a smart choice for businesses looking to operate sustainably.

Durability is another hallmark of State Industries' gas water heaters. Constructed from robust materials, these units are designed to withstand the rigors of daily use in a commercial environment. The tanks are often lined with glass and reinforced to prevent corrosion, enhancing the longevity of the unit. Additionally, the use of high-quality components ensures minimal maintenance and reliable operation over time, allowing businesses to focus on their core activities rather than downtime due to equipment failure.

State's Commercial Gas Water Heaters also come equipped with advanced safety features. This includes built-in temperature controls, pressure relief valves, and flame failure protection, which work together to ensure safe operation even in high-demand situations. These features provide peace of mind to operators and help meet stringent safety standards, making them suitable for any commercial setting.

Furthermore, the versatility of these water heaters is remarkable. They are available in various sizes and configurations, allowing businesses to choose a model that perfectly fits their water heating requirements. Whether for high-volume hot water needs or continuous flow applications, State's Commercial Gas Water Heaters are designed to adapt.

In conclusion, the State Industries Commercial Gas Water Heater stands out as a top choice for businesses needing reliable and efficient hot water solutions. With its focus on efficiency, durability, safety, and versatility, this water heater is built to meet the rigorous demands of the commercial market while providing value and peace of mind to operators.
Top Page Image Contents