State Industries SRGSS00905 warranty Residential Gas Water Heaters, Select Power-Vent, Phone

SELECT® POWER-VENT

Residential Gas Water Heaters

State Select® Power-Vent 40-gallon and 50-gallon gas water heaters now feature patented C3 Technology® design, which meets Phase II of the ANSI Z21.10.1 standards for flammable vapor ignition resistance. A power-vent water heater is an excellent alternative in many replacement applications where a conventional vertical-vent model is not a practical option and offers versatility for placement of gas water heaters in residential new construction.

Enhanced Power-Vent Capabilities

•For greater versatility than ever before, system allows combined horizontal and vertical vent runs up to 120 equivalent feet with 3" pipe, up to 160 equivalent feet with 4" pipe on 40,000 BTU and 50,000 BTU models

•40 and 50-gallon models vent using 2", 3" or 4" Schedule 40 PVC, CPVC or ABS pipe

•Supplied with termination screens and elbow

•See next page for complete information on vent capabilities

Intelli-Vent™Electronic Gas Control

•Silicon nitride hot surface ignitor provides superior durability and eliminates standing pilot

•Advanced circuitry ensures precise control of water temperature, provides easy to understand system diagnostics

•Gas connection located on side of control, same as conventional gas control

Diffuser Dip Tube

•Reduces lime and sediment buildup, maximizes hot water output

•Made from State PEXAN™, a cross-linked polymer that can withstand long-term exposure to temperatures up to 400ºF

Patented Glass-Lined Tank with Aluminum Anode Rod

• For long-lasting protection against rust and corrosion

Advanced Power-Vent Blower Design

• Equipped with 110/120 volt electrical system (rating 3 amps or less), 6-foot cord with standard 3-prong male connector

• Patented design reduces NOx emissions up to 33%
• Complies with Southern California and Texas requirements
Durable Brass Tamper-Resistant Drain Valve
Factory-Installed Temperature & Pressure (T&P) Relief Valve	GAS-FIRED
Design-Listed by Underwriters Laboratories
• Listed according to ANS Z21.10.1 or ANS Z21.10.3 standards
governing storage-type water heaters
• Additional code compliance: UBC, CEC, SBCC, CABO, HUD, BOCA
National codes, ASHRAE/IESNA 90.1-1999 and 2004 NAECA
Maximum Hydrostatic Working Pressure: 150 psi	GAS-FIRED
C3 Technology® Gas Water Heater Design – See other side
6-Year Limited Tank and Parts Warranty
• Consult written warranty or contact State Water Heaters for
complete information.

For Additional Technical Information,

PHONE 800-365-0024

STATE WATER HEATERS

500 Tennessee Waltz Parkway, Ashland City, TN 37015 www.statewaterheaters.com

Page 1 of 2

SRGSS00905