Customer Responsibilities
Any sales, use, or other tax incident to the replacement of parts under this warranty is the responsibility of the purchaser.
7-2 Technical Specifications
Annex B Information
The following design information is provided for your reference:
1. | No modifications are allowed to this equipment that could alter the CE compliance | |
2. | Ambient temperature: | 0 degrees Celsius – Maximum (104 degrees Fahrenheit) |
3. | Humidity range: | 50% relative humidity |
4. | Altitude: | Sea level |
5. | Environment: | Clean, |
6. | Radiation: | None |
7. | Vibration: | Minimal, i.e. machine mounting |
8. | Allowable voltage fluctuation: | +/- 10% |
|
9. | Allowable frequency fluctuation: | Continuous | +/- 1% |
|
| Intermittent | +/- 2% |
10. | Nominal supply voltage: | 460/3/60 (Verify on serial number tag) | |
11. | Earth ground type: | TN (system has one point directly earthed through a | |
| protective conductor) |
|
|
12.Power supply should include a ground connection.
13.
14.The
15.Dryer is not equipped with local lighting.
16.Functional identification
17.Dryer is equipped with a CE mark
18.Cable support may be required for power cord, depending on final installation.
19.No one is required to be in the interior of the electrical enclosure during the normal operation of the unit. Only skilled electricians should be inside the enclosure for maintenance.
20.Doors can be opened with a screwdriver, but no keys are required.
21.
22.All dryers should be moved around and set in a place with a lift truck or equivalent.
23.There are no frequent repetitive cycles that require manual control⎯repetitive functions are automatic while the dryer is operating.
24.The machine is not equipped with cable less controls.
25.
15, 30, & 60 cfm Compact Dryers | 41 |
