Sterling 882.00291.00 8.8.8.8, Indicator, Name, Description, Temperature Controller Keys

Identifying Process Air Temperature Controller LED Indicators

	Indicator	Name		Description
PV		Process Value		During normal operation, the process value (PV)
		Numeric LED		numeric LED indicator displays the process
	8.8.8.8
				temperature at the To Process thermocouple. It
				also lists parameters during setup and error
				messages if any errors occur.
SV		Set Value	During normal operation, the set value (SV)
		Numeric LED	numeric LED indicator displays the process set
	8.8.8.8
			point temperature selected for the dryer. The dryer
			then maintains this set point temperature. This
			LED indicator also displays parameter and pre-set
			function values during configuration setup.
OUT1		Out 1 LED		Lit when Control Output 1 is on. The Out1
				indicator lights when the controller signals the
				process heaters to be energized.
OUT2		Out 2 LED		Lit when Control Output 2 is on. Not used in
				this application.
	AT	AT LED		Flashes during auto-tuning in process value (PV)
				screen.
	Indicator	Name		Description
ALARM1		ALARM 1 LED		Lights in the Operation Indicator Section when
				the output function assigned to auxiliary output
				1 turns on. The ALARM1 indicator lights when
				the process temperature exceeds the set point
				temperature by more than the alarm deviation
				value.
	Identifying	Temperature Controller Keys
	Indicator	Name		Description
		Mode Key		Press the Mode key to shift the display to the next
				set of parameters. The menu screen displays.
		Down Key	Press the Down arrow key to lower the process air
				set point temperature. During setup, it lets you
				decrease the value of the parameter displayed on
				the set point LED readout.
		Up Key		Press the Up arrow key to raise the process air set
				point temperature. During setup, it lets you
				increase the value of the parameter displayed on
				the set point LED readout.

15, 30, & 60 cfm Compact Dryers 22