Sterling A0544325 General Information, Introduction, Necessary Documents, Models Covered

1 General Information

1-1 Introduction

SMC Series Water Chillers are reliable, accurate, and easy-to-use air cooled chillers designed for use with water/glycol. Standard range of operation is 30°F (-1°C) to 65°F (18°C). A crankcase pressure regulating valve option is available for processes requiring a leaving water temperature of up to 75°F (24°C). SMC models are available in ½ hp (373 W), 1 hp (746 W), and 1½ hp (1,118 W) models and have an internal six gallon (23 liter) reservoir. All models are self contained, fully assembled, and shipped ready to use.

A properly installed, operated, and maintained SMC Series Chiller will provide many years of reliable operation. To get the most satisfaction from your new chiller, read and follow the instructions in this manual.

1-2 Necessary Documents

The following documents are necessary for the operation, installation and maintenance SMC Series Chillers. Additional copies are available from Sterlco. Familiarize the appropriate personnel with these documents:

;This manual.

;The electrical schematic and connection diagram mounted inside the control enclosure. Typical schematics for general reference are provided in Figures 14 and 15 on Pages 32 and 33.

;The operation and installation manuals for installed accessories and options.

;The Customer Parts List included in the information packet.

1-3 Models Covered

This manual provides operation, installation, and maintenance instructions for SMC Series Chillers. Model numbers are on the serial tag. Please know the model number, serial number and operating voltage of your chiller if you need to contact Sterlco.

SMC Series Chiller models are designated by approximate compressor horsepower. A SMC050 chiller has a ½ hp (373 W) compressor, a SMC100 chiller has a 1 hp (746 W) compressor, and a SMC150 chiller has a 1½ hp (1,118 W) compressor.

SMC Series Chillers Page 7