36
Adjusting Proportioning On the Fly During Operation
1. While the hopper loader is operating, press the
SCROLL
SCROLL key
until the screen displays the percent of Material B as

P. nn

.
2. Press the UP key or the DOWN key to change the value
as needed.
3. When the percentage of Material B you want displays, press the
S
START/STOP
START/STOP/ SELECT/SET key to set it.
- or -
Press the
SCROLL
SCROLL key to leave the menu unchanged.
The screen then displays the Vacuum Timer menu.
Note: “On-the-fly” adjustments range between 1% and 99%. To set the
percentage of Material B from 0% to 100%, stop the Series One
Plus controller and reset proportioning while the unit is in
Standby mode, as described in the previous section.
5-7 Using the Batch Counter
The Series One Plus controller features a batch counter you can view during operation. The
batch counter provides a rough approximation of total material throughput.
Viewing the Batch Counter
While the hopper loader is operating and while the screen displays the vacuum timer display:
Press the
SCROLL
SCROLL key until the screen displays the four-digit
batch counter.
The screen remains on the batch count display until you press the
SCROLL
SCROLL key again.