Unit Operation

SSL and SSIL Series Hopper Loaders – Series One Plus Control

Reference Manual (PN: 882.00149.00) for

Complete Operation and Installation Instructions

(Available online at www.acscustomerservice.com)

(Refer to main manual for complete installation instructions)

1.Mount hopper mounting flange to machine bin or feed throat, using rivets if possible.

2.Ensure that unit is level for proper operation.

3.Attach flex hose to unit and pickup wand. Secure it with hose clamps.

4.Attach clean, dry 80-120psi air.

5.Plug unit into grounded three-prong receptacle.

(Refer to main manual for complete operating instructions)

1.Insert pickup wand into desired material.

2.Press the START/STOP key.

Note: The hopper loader loads itself until full, then dumps and repeats. It pauses only when the machine bin below is full.

3.To stop the unit from loading, press the START/STOP key.

1.Insert pickup wands into desired materials.

2.Press SCROLL key repeatedly until screen displays “3”.

3.Press the START/STOP/SELECT key to select the “% of MAT’L B” menu.

4.Use the UP and DOWN keys to set the desired % of Material B.

5.Press the START/STOP/SELECT key to set this value.

6.Press the START/STOP/SELECT key again to start the hopper loader.