SSV 05/R

2.5. Electrical connection

»

Observe the regulations of the local electricity board.

The operating voltage is 230 V, AC, PE, 50/60 Hz.

Special voltages available on request.

The connected load is approx. 15 W (0.02 hp).

The connection takes place by means of a mains connector.

Aseparate protection of the socket is not necessary. Connect the plug of the probe cable to the control unit. Plug the mains connector into a corresponding socket.

SM4-605

Installation instructions 18

Page 19
Image 19
Sterling operating instructions SSV 05/R Electrical connection