Sterling Plumbing 442424, 442428 manual Install the Lavatory

The drain and faucet are not

shown to

Position Six Self-Adhesiveimprove clarity. Pads to the Top of the Pedestal.

	Cap Nuts
	Washer
Hanger Bolt	Pedestal
Lag Bolt
	The pedestal
	height is reduced
Washer	to improve clarity.

2. Install the Lavatory

Apply six self-adhesive pads along the top surface of the pedestal.

Mark the pedestal centerline on the ¯oor.

CAUTION: Risk of personal injury or product damage. This pedestal lavatory is heavy. Get help lifting and moving it.

Position the pedestal on the ¯oor centerline. Refer to the roughing-in information for correct placement.

Carefully lift the lavatory into place on the pedestal. Level the lavatory and add additional self-adhesive pads as needed to level. If the bottom of the lavatory contacts the pedestal, reposition the self-adhesive pads as needed. Make sure the lavatory ®ts ¯at against the ®nished wall.

Refer to the roughing-in information to ensure the correct distance between the pedestal and the wall.

Mark the two lavatory anchoring holes on the ®nished wall.

Mark the pedestal anchoring hole on the ¯oor through the hole in the pedestal bottom.

Carefully remove the lavatory from the pedestal.

Carefully move the pedestal and lavatory away from the installation area.

Drill 3/16² holes at the marked locations on the ®nished wall and ¯oor.

Sterling 5 1021720-2-A