1 : Battery type : Ensure that the colour of the L.E.D. is in accordance with the battery type selected.
2 : Overvoltage: The red light indicates an overvoltage due to an overcharging(from solar panels for example).
3 : High charger temperature: The L.E.D. becomes yellow and the charger stops when the temperature is too high. Ensure that the fan is working. The charger will restart at a lower temperature.
4 : High battery temperature: The charger switches off if the battery temperature reaches 50 °C. Investigate your batteries and their water level. Restart your charger only if you are sure all is OK.
5 : Constant current : The L.E.D. is orange when there is a constant current from thecharger to the batteries.
6 : The L.E.D. becomes yellow when the voltage reaches 14.0V(2425CED: 28.0V). The charger is in
step 2: absorption
7 : Float /powerpack : The L.E.D. indicates that the charger is in step 3.
variable 
STEP STEP STEP
12 3
4 STEP CHARGE
STEP 1 – BOOST: During this period, the charger delivers a maximal current and the voltage increases progressively to
reach 14.4V or 14.8V (2425CED: 28.8V or 29.6V) according to the battery type. This step is depending of the initial status of your batteries. The
STEP 2 – ABSORPTION: Adjustable period where the voltage is kept at its maximum and the current decreases in order to optimize the battery charge. During this phase the yellowL.E.D. will come on.
STEP 3 – FLOAT: The voltage is kept at a level of 13.6V (2425CED: 27.2V) in order to maintain the charge without increasing the temperature of the batteries. They can be left connected without any damage. Only the bottom greenL.E.D. is on. - POWERPACK: Full current is available for
STEP 4 – RESET: If the battery voltage goes down below 11.5V (2425CED: 23.0V), the charge cycle starts all over again with step 1.
FEATURES |
|
Input voltage: AC | Output short protection: Yes |
Input frequency: | Battery reverse polarity protection: Yes, by fuse. |
Charge:DC 14.4V or 14.8V | Thermal protection: Yes |
(2425CED: 28.8V or 29.6V) | Overload protection : Yes |
Output current: 1230CED: 30A max. |
|
1240CED: 40A max. |
|
1250CED: 50A max. |
|
2425CED: 25A max. |
|
Efficiency > 85 % |
|
DIMENSIONS |
|
Length: 340mm |
|
Width: 180mm |
|
Height: 90mm |
|
Weight: 3.3kgs |
|
