General：
“3 in 1” It is a powerful pure sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a
Besides all this functions ,however, the “3 in 1” has several advanced
features that provides a range of new applications as outlined bellow：
In the event of a grid failure ,or shore or generator power being disconnected, the inverter within the “3 in 1” is automatically In less than 20 milliseconds activated and takes over supply to the connected loads. Allowed them to continue to operate without disruption. The “3 in 1” is very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply.
INVERTER：
Pure Sine Wave AC output.
Very low total harmonic distortion (< 2 % )
High surge capacity and
Load detection system for “power saving” mode Extremely high efficiency.
Battery Charger ：
The “3 in 1” series is built around a
Multistage
Care of all batteries ( temperature sensor optional ) Built in solar charge regulator.
Bypass Function：
Automatic 60 A (3000W ) / 30 A ( 1500W ) transfer relay turns inverter and charger on / off.
Fast ( UPS ) mode or delay mode of the Bypass switch. Power sharing prevent tripping of shore power breaker.
Basic Remote Control：
Power output on / off
Function mode select
Programming Battery charging voltage
Error message display
Programming auxiliary relay (x2 )
Programming input current limit for power share
