INSTALLATION AND ELECTRICAL HOOK-UP
Caution
Professional techniques need to be used when making any electrical connection. A qualified electrician should perform these procedures.
Be sure to follow all standard safety procedures for installing electrical devices.
Do not disassemble or alter the configuration of the motor or the unit's electrical connections. This may cause injury to you or damage to the product.
The electrical connection should be made only to the type of power source indicated on the marking label.
Installing the AVS
Position the case so that the motor connection is at audience right. Do not attach any items to the batten or screen assembly, the door assembly, or the arm assembly.
Ensure that the case is level and plumb.
If the screen is large, secure the case (for example, bolt to the floor). Attach
Caution
Do not make any adjustments to the steel cables.
Do not remove or loosen any bolts on the case or spring arms.
AC connection
AC electrical hook-up
The motor requires standard AC power, hardwired using a Romex connection. The connection is made to the
General suggestions for wiring:
Soldering is recommended.
The use of wire nuts is acceptable.
Figure 2. AC connection
4 | Stewart Filmscreen Corporation |
