Features, Install Steps, SmartDup VP-8220 Operation Manu

1.Duplicator Converter.

2.CD-ROM Box (VP-6020) x 2

3.AC/DC Power Adaptor (Universal Type +90 ~ +250VAC)

Features:

1.One to one Stand-Alone IDE CD Duplicator.

2.Auto duplication & Easy operation without any push bottom.

3.Fastest CD Duplicator up to 24x speed (ViPowER is the only factory that manufactures it today!)

4.Auto Detects CD-R or CD-RW media's acceptable maximum writing speed and minimum writing time.

5.Upgrade through Internet, or upgrade via CD-ROM.

6.High Performance with Low cost & easy installation. No additional H/W or S/W required.

7.External Power supply.

8.Supports Buffer Under Run.

9.Capable of connecting to your Desktop/ Notebook via Fire Wire/ USB/ PCMCIA/ Card Bus cable. (See option Desktop Interface)

10.Support Formats: Audio CD (CD-DA), CD-ROM, CD-XA (Photo & Video CD), CD-Digital, CD-Bridge, CD-Extra, Video CD & CD-Text.

11.Automatically detects/ Erases/ Re-writes/ Copies.

12.Compatible with most well known CD-RW & CD-ROM Devices.

13.User friendly with LED display function.

14.Buzzer to alert user.

1.Install CDR-W Writer & CD-ROM Driver in each CD-ROM box. Must put rubber stand on each CD-ROM box.

2.CD-ROM Driver on top & CDR or CDR-W Writer on the bottom.

3.Plug in Duplicator Converter in both CD-ROM box connectors.

4.Plug in Power Cable in Duplicator Converter.

5.Plug in Power Cord to AC Power source (+90 ~ +250VAC).

6.LED Display on top of Duplicator Converter.

7.Dip Switch on Top of Right hand side. To adjust duplicator function.

8.Rock Switch on Right hand side, power switch. Normally in ON position

Function Setting

High Speed (Maximum)

Low Speed (4x)

SmartDup VP-8220 Operation Manu