H5 (Test Only): DIP SW 1 3 4 at ON position, 2 at OFF position--------------
L5 (Test Only): DIP SW 1 3 at ON position, 2 4 at OFF position---------------
If you adjust DIP SW to L5, all operation steps same as H5, the Recording Speed will drop to 4x only.
5-1. Turn Rock Switch to position (CD Duplicator). LED will show version number.
Power-On:display firmware version number. (Buzzer 0.5s X1) ex:
5-2. Than LED display showing: from 00,11, 22, 33, ......88, 99
5-3. Duplicator will chk itself & get ready.
Self-Test:Only one segment is running and display "rd" (ready)
5-4. SmartDup ready, please insert your CD title into your CD-ROM Drive & Blank CD-R or CD-RW Media in CD-RW Writer.
5-5. LED Display showing final counts down, than LED showing H5 or L5.
Count Down: After drives & discs ready in current mode, wait for 5 seconds. (Buzzer 0.2s X1)
5-5-1. If put in CD-RW Media with Data; CD-RW will eject & show Er.
FAIL: After Self-Test or Test or Erase or Copy or Upgrade. (Buzzer 0.2X3)
5-6. LED Display showing CD-R or CD-RW Media maximum writing speed.
CD-R Maximum Writing Speed:
or or
5-7. LED Display showing CD-R or CD-RW Media minimum writing time remaining.
Remain minutes: During Test or Copy mode. Flash every second
ex: or or
5-8. After Testing success, Buzzer will Beep & eject CD-R media. LED showing 00.
OK: After Self-Test or Test or Erase or Copy. (Buzzer 1sX2)
5-8-1. If fail, LED will show: Er & eject CD-R Media also.
FAIL: After Self-Test or Test or Erase or Copy or Upgrade. (Buzzer 0.2X3)