ENENGLISH
Use these identification terms during all contact with service workshops and when purchasing spare parts.
As soon as possible after acquiring the machine, the above number should be written in on the last page of this publication.
7 ENVIRONMENT
For environmental reasons, we recommend that particular attention is given to the following points:
•Always use Alkylate petrol (“Environmental petrol“).
•Always use a funnel and/or a petrol can with overfill protection to avoid spillage when filling with petrol.
•Do not fill the petrol tank right to the top.
•Do not fill too much engine and/or transmission oil (see user instructions for the correct amount).
•Collect up all oil during oil changes. Do not spill any. Hand in the oil to a recycling station.
•Do not discard replaced oil filters with normal rubbish. Hand them in to a recycling station.
•Do not discard replaced lead batteries with normal rubbish. Hand in to a battery collection point for recycling.
•Replace the silencer if it is broken. Always use original spare parts when carrying out repairs.
•If the machine was originally equipped with a catalytic converter and this is broken, a new catalytic converter must be installed after removing the old one.
•Always get a specialist to adjust the carburettor if necessary.
•Clean the air filter according to the instructions given (see user instructions).
8INSURE YOUR RIDE-ON LAWNMOWER
Check the insurance for your new
9 GENERAL
This symbol indicates WARNING. Per- sonal injury and/or damage to property may result if the instructions are not followed carefully.
You must read these instructions and the accompanying pamphlet “SAFETY INSTRUCTIONS” carefully, before the assembly begin.
10 ASSEMBLY
To avoid injury and damage to people and property, do not use the machine until all the measures in this instruction have been carried out..
10.1Assembly components
Components that are to be used at assembly are in- cluded in the delivery. See fig. 1.
Supplied in bag:
A plastic bag containing components, which are to be used at assembly, are included in the delivery. See fig. 1. The bag contains:
Pos | No. | Designation | Dimension |
A | 1 | Pin | 6 x 36 |
B | 1 | Shim washer | 16 x 38 x 0.5 |
C | 1 | Shim washer | 16 x 38 x 1.0 |
D | 2 | Ignition key |
|
F2 Screw for battery
G2 Nut for battery
H | 2 | Nut | M8 |
I | 1 | Towing plate |
|
J | 2 | Screw | 8 x 20 |
Q | 2 | Screw | M10 x 35 |
R | 2 | Nut | M10 |
Supplied installed on the front axles: Pos No. Designation
K2 Lock pin
L2 Washer
Secure to the implement lifter:
Pos | No. | Designation |
M | 2 | Deck mount |
24