Stiga 8211-0072-80 manual Storage, Service, Purchase Terms, Product Identity, English

Models: 8211-0072-80

1 18
Download 18 pages 45.01 Kb
Page 9
Image 9
3 STORAGE

ENGLISH

covering the valves, the battery should be replaced.

3 STORAGE

Empty the petrol tank. Start the engine and let it run until it stops.

Replace the oil while the engine is still warm. Unscrew the spark plug and pour a tablespoonful of oil into the cylinder. Rotate the engine a few turns to that the oil is distributed in the cylinder. Install the spark plug.

Clean the entire machine. It is particularly important to clean under the cutting deck. Touch up paint damage to prevent rust.

Store the machine indoors in a dry place. Machines with an electric starter:

Remove the battery. Store it well charged in a cool place (between 0°C and +15°C).

At the correct storage temperature, the battery should be maintenance-charged every four months.

The battery acid is extremely corrosive and can cause injuries and damage to skin and clothing. Always use rubber gloves and glasses (goggles) to protect your eyes. Avoid inhaling any acid vapour.

Do not incline the battery too much so that the battery acid can run out onto hands or clothing. If this should happen, rinse with plenty of water.

4 SERVICE

Authorised service workshops carry out repairs and guarantee service. They use original spare parts.

STIGA original spare parts and accessories are designed specifically for STIGA machines. Please note that ‘non-original’ spare parts and accessories have not been checked or approved by STIGA.

The use of such parts and accessories can affect the function and safety of the machine. STIGA accepts no responsibility for damage or injuries caused by such products.

Original spare parts are supplied by service workshops and by many dealers.

A list of these can be found on STIGA’s Internet website at: www.stiga.com.

We recommend that the machine be handed in to an authorised service workshop for service, maintenance and checking of the safety devices once a year.

5 PURCHASE TERMS

A full guarantee is issued against manufacturing and material defects. The user must carefully fol- low the instructions given in the enclosed docu- mentation.

Guarantee period

For consumer use: two years from purchase date.

For professional use: 300 hours or three months, whichever comes first.

For Stiga Park and Stiga Villa, it is possible to have a one year extension to the guarantee if the condi- tions in the service book are satisfied.

For batteries: six months from the purchase date.

Exceptions

The guarantee does not cover damage due to:

- neglect of the user to acquaint himself with ac- companying documentation

-carelessness

-incorrect and non-permitted use or assembly

-the use of non-genuine spare parts

-the use of accessories not supplied or approved by Stiga

Neither does the guarantee cover:

-wearing components such as blades, belts, wheels and cables

-normal wear

-engine and transmission. These are covered by the appropriate manufacturer’s guarantees with separate terms and conditions.

The purchaser is covered by each country’s national laws. The rights to which the purchaser is entitled with the support of these laws are not restricted by this guarantee.

6 PRODUCT IDENTITY

The identity of the product is determined by two parts:

1. The machine’s item and serial numbers:

2.The engine’s model, type and serial numbers:

23

Page 9
Image 9
Stiga 8211-0072-80 manual Storage, Service, Purchase Terms, Product Identity, English