ENGLISH | GB |
|
|
justment of a rear rake (available as an accessory).
The switch is used to raise and lower the rear rake.
Connection cables for the rake are located to the rear of the machine, to the left on the top of the bumper (Pro16 and Pro18 are prepared for a rear rake).
18. SAND SPREADER (Pro20)
The machine has been designed for electrical ad- justment of a sand spreader (available as an acces- sory).
The switch is used to start and stop the
12V spreader.
A connection contact for the sand spreader is locat- ed to the rear of the machine, to the left on the top of the bumper (Pro16 and Pro18 are prepared for a sand spreader).
19.DISENGAGING LEVER (Presi- dent - Royal - Pro16 - Pro18 - Pro20)
A lever for disengaging the variable transmission. Enables the machine to be moved by hand without the help of the engine. There are two positions:
1.Lever moved back – transmis- sion engaged for normal opera- tion.
2.Lever moved forward – trans- mission disengaged. The ma- chine can be moved by hand.
To avoid damage to the transmission, do not tow the machine for any great distance.
1.Mowing
Using mower deck
2.Sweeping
Using brush unit
3.Snow clearance
Using snow blade
4.Grass clipping and leaf collection
Using towed collector
5.Grass and leaf transport
Using dump cart
6.Sand spreading
Using sand spreader
7.Weeding on gravel paths
Using front mounted hoe
8.Lawn edge trimming
Using edge trimmer
9.Moss scarification
20. FUEL GAUGE/FUEL CAP
Fuel cap with
Senator and President have a fuel cap without a fuel gauge.
The fuel tank has a capacity of 11.5 l.
AREAS OF USE
The machine may only be used for the following tasks using the STIGA accessories stated.
Using moss scarifier
The maximum vertical load on the towing hitch must not exceed 100 N.
The maximum
NOTE! Before using a trailer – contact your insur- ance company.
NOTE! This machine is not intended to be driven on public roads.
11