Stiga 8211-0276-02 GEAR LEVER Senator, POWER TAKE-OFFPro18 - Pro20, REAR RAKE Pro20, English

GB ENGLISH

tion to operating position 2, the spotlight is acti- vated. This uses up battery power. Do not leave the machine with the key in position 2 (applies to Pro16-Pro18-Pro20).

10. GEAR LEVER (Senator)

A lever for selecting one of the five forward gears in the gearbox (1-2-3-4-5), neutral (N) or reverse

(R).

The clutch pedal must be kept pressed in when changing gear.

NOTE! You must make sure the machine is quite stationary before changing from reverse to forward gear or vice versa. If a gear does not engage imme- diately, release the clutch pedal and then press it in once again, then engage the gear once again. Never force a gear in.

tion.

2.Backward position – the differential in- hibitor is engaged. For normal operation. Works for both forward and reverse drive.

The differential lever is of greatest use when the rear wheels are unevenly loaded. For example, when driving across a slope, where the upper rear wheel is not as loaded, as wheel as when turning sharp corners where the inner rear wheel bears a lesser load.

When driving during the winter on slippery surfac- es, the drive capacity is improved if snow chains are not used.

When the differential inhibitor is engaged, the steering is heavy. Avoid turning the steering wheel!

11.POWER TAKE-OFF (Senator - President - Royal - Pro16)

A lever for engaging and disengaging the power take-off for driving front-mounted accessories. There are two positions:

1.Lever in forward position – power take- off disengaged.

2.Lever in backward position - power take-off engaged.

12.POWER TAKE-OFF (Pro18 - Pro20)

Switch for engaging/disengaging the electromag- netic power take-off for driving front-mounted ac- cessories. There are two positions:

1.Press the front part of the switch – the power take-off is engaged. The symbol lights up.

2.Press the rear part of the switch – the power take-off is disengaged.

13.DIFFERENTIAL INHIBITOR (Pro16 - Pro18 - Pro20)

Lever for engaging the differential inhibitor. This improves the towing capacity by locking the rear wheels so that both wheels drive simultaneously. There are two positions:

1.Forward position – the differential in- hibitor is not engaged. For normal opera-

14.HOUR METER (President - Royal - Pro16 - Pro18 - Pro20)

Indicates the number of working hours. Only works when the engine is running.

15.CRUISE CONTROL (Royal - Pro16 - Pro18 - Pro20)

A switch for activating the cruise control. The function of the cruise control allows the drive ped- al (5) to be locked in the desired position. You do not need to use your right foot.

1.Press down the drive pedal until the de- sired speed is obtained. Then press the front part of the switch to activate the cruise control. The symbol will light up.

2.Disengage the cruise control by press- ing the rear part of the switch.

16.CUTTING HEIGHT ADJUSTMENT (Pro16 - Pro18 - Pro20)

The machine is equipped with a control for using the mower deck with electrical cutting height ad- justment (available as an accessory).

The switch is used to adjust the cutting height in continuously variable positions.

The contact used for connecting the mower deck is mounted on the right side, in front of the front tyre (fig. 2).

17. REAR RAKE (Pro20)

The machine has been designed for electrical ad-

10