GB | ENGLISH |
|
|
GENERAL
This symbol indicates WARNING. Per- sonal injury and/or damage to property may result if the instructions are not followed carefully.
You must read these instructions for use and the accompanying pamphlet “SAFETY INSTRUCTIONS” careful- ly, before starting up the machine.
1. IMPLEMENT LIFTER
Apedal for raising
To lift up the accessory, press the pedal down as far as it will go. Then release the pedal, the implement lifter is now locked in the lift position.
To lower the accessory, press the pedal down so that the lock is released. Lower the implement lift- er to the working position by slowly lifting your foot from the pedal.
SYMBOLS
The following symbols are displayed on the ma- chine in order to remind you about the safety pre- cautions and attention necessary when using the machine.
The symbols mean:
Warning!
Read the instruction book and safety man- ual before using the machine.
Warning!
Beware of objects being flung out. Keep spectators away.
Warning!
Always use hearing protectors.
Warning!
This machine is not designed to be driven on public roads.
Warning!
The machine, equipped with original ac- cessories, must not be driven in any direc- tion on slopes with a gradient greater than 10º.
Warning!
Clamp risk. Keep hands and feet well away from the articulated steering joint.
Warning!
Risk for burn injuries. Do not touch the si- lencer/catalytic converter.
CONTROLS AND
INSTRUMENTS
Items 1 - 20, see figures 1 - 9
2. LIFT HELP (Pro18 - Pro20)
The implement lifter is complemented with adjust- able lift help in the form of a gas spring. This facil- itates lifting heavy accessories.
Under the engine casing, on the top of the rear bumper, there is a setting crank.
Use this to increase/decrease the lift help.
Screw
Screw clockwise to decrease the lift help if lighter accessories are being used.
3A. SERVICE BRAKE/CLUTCH (Senator)
A pedal that combines both service brake and clutch. Three positions:
1.Pedal released – forward drive engaged. The machine will move if a gear is engaged. Serv- ice brake not activated.
2.Pedal depressed halfway – forward drive disengaged, gear shifting can be performed. Serv- ice brake not activated.
3.Pedal fully depressed – for- ward drive disengaged. Service brake fully activated.
NOTE! You must never regulate the operating speed by slipping the clutch. Use a suitable gear in- stead, so that the right speed is obtained.
3B. SERVICE BRAKE (President - Royal - Pro16 - Pro18 - Pro20)
A pedal that acts upon the machine’s braking sys-
8
