english

Setting Up

 

1

 

 

 

1

 

 

 

2

 

 

 

566BA003 KN

 

 

:

Place the filing tool on the guide bar.

4

3

 

The clamping jaws (1) must face the

:

 

 

 

bar nose and be in line with top

 

 

 

edge of rivet heads.

 

 

: Tighten down the wing screw (2).

 

566BA004 KN

566BA002 KN

 

 

Use a slide caliper or similar to find the shortest cutter. This is the master cutter for filing all other cutters.

If the master cutter is in the left-hand row of cutters, clamp the guide bar so that the bar nose points to the right. If the master cutter is in the right-hand row of cutters, the bar nose must point to the left.

:Use the adjusting screw (3) to center the filing tool above the chain.

:Tighten the second clamping jaw with the clamp screw (4) so that the chain can still be pulled along the bar with a screwdriver or suitable rod engaged in a cutter.

14

FG 3