STIHL FG 3 manual “a”

english

2

3

566BA015 KN

:Remove round file and fit the triangular file (2) 0811 421 8971 in its place.

:Set filing angle to 0°.

:Pull chain along bar until the depth gauge is under the file.

:Adjust stop (3) until it butts against the back of the cutter.

4

566BA016 KN

:Rotate height adjusting screw (4) so that the depth gauge is filed back to the required height (flush with gauge). Then remove the filing gauge and file down all depth gauges to the same setting.

a

566BA017 KN

:Finish off by filing the slope by hand, parallel to the stamped marking, until dimension “a” is approx.

0.5 mm.

FG 3 19