STIHL FG 3 Sharpening, (8), (9), (4), (1), (2)

10 4

8

9

10 4	KN
	566BA010
: Rotate the knurled nut (8) to move	: Now rotate the knurled nut a little
stop (9) up against the back of the	more until the side plate presses
cutter to be sharpened.	against the file and the stop bar (10)
	is lifted about 0.1 to 0.2 mm off the
	stop roller (4).

english

Sharpening

1 2

3

1 2

566BA011 KN

:Sharpen the master cutter with 2 to 3 firm strokes of the file. Always file from the inside to the outside of the side plate.

:The stop bar (1) should now locate against the stop roller (2).

If this is not the case, readjust the stop (3) slightly and pull the chain up against it. Check the position of the stop again.

FG 3 17