English / USA
4
4
1
5
002BA103 KN
Fitting skirt and blade
These parts must be fitted to the deflector (1) when you use a mowing head:
:Slide the lower guide slot of the skirt (4) onto the deflector (1) – it must snap into position.
:Push the blade (5) into the upper guide slot on the skirt and line it up with the first hole.
:Fit the screw and tighten it down firmly.
7 7
6
7
002BA028 KN
Mounting the stop
:Always fit stop (6) when you use a circular saw blade.
:Place the stop on the gearhead flange.
:Fit the three M 5 x 18 screws (7) and tighten down securely.
Mounting the Cutting Tools
002BA104 KN
Preparations
:Lay your brushcutter on its back with the gearhead facing upward.
Mounting Hardware for Cutting Tools
The mounting hardware supplied depends on the cutting tool that comes as original equipment with the new brushcutter.
Mounting hardware is not packed with the machine
Only mowing heads may be mounted.
26 | FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R |