2

 

KN

1

249BA017

 

:Press down the trigger interlock (1) and squeeze the throttle trigger (2) (full throttle) – this sets the throttle cable correctly.

Fitting the Carrying Eye

1

1

2

KN

 

002BA142

English / USA

Mounting the Deflector

1

3

2

3

KN

002BA102

 

:For position of carrying eye1) see "Parts and Controls"

:Place the clamp (1) with the tapped hole on the left-hand side of the drive tube.

:Squeeze the two ends of the clamp together and hold in that position.

:Insert M 6 x 14 screw (2).

:Line up the carrying eye.

:Tighten down the screw firmly.

1)Included as standard or available as special accessory

Mounting the deflector

1 = Deflector approved for all cutting tools

2 = Deflector approved for use with mowing heads only

:Place the deflector on the gearhead.

:Fit the plate (3) and line it up.

:Insert M 5 x 18 screws and tighten down firmly.

FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R

25