3 |
|
4 |
|
| 5 |
1 |
|
2 | KN |
| 002BA164 |
: Pull the hose (1) (protector for
shipping) off the shaft (2).
: Go to "Mounting the Mowing Head".
If you want to mount a metal cutting tool in place of a mowing head, you will need the following additional parts: Nut (3), rider plate (4) and thrust washer (5) (special accessories).
Mounting hardware is packed with the machine
Mowing heads and metal cutting tools may be mounted.
Mounting hardware is loose
:Pull the hose (1) (protector for shipping) off the shaft (2).
The nut (3), rider plate (4) and thrust washer (5) are in the parts kit supplied with the machine.
:Go to "Mounting the Mowing Head" or "Mounting Metal Cutting Tools".
Mounting hardware is secured to gearhead
:Go to "Removing Mounting Hardware"
English / USA
Removing Mounting Hardware
:Block the shaft – see next section on "Blocking the Output Shaft".
:Use the combination wrench (6) (supplied with machine or available as special accessory) to unscrew the nut (3) clockwise
:Pull the thrust washer (5) off the shaft (2).
FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R | 27 |