English / USA
Balancing the Brushcutter
A | KN | |
002BA034 | ||
| ||
|
|
The type and style of harness and carabiner (spring hook) depend on the market.
Attaching the Unit to the Shoulder Strap
:Attach the spring hook (1) to the carrying ring (2) on the drive tube.
:Loosen the screw (3).
Balancing the Unit
The unit is balanced differently, depending on the cutting tool used.
Proceed as follows until the conditions specified under "Floating positions" have been met:
:Adjust the carrying ring – tighten the screw moderately – let the unit go until it is balanced – then check the floating position.
| KN |
B | 002BA035 |
| |
|
|
Floating positions
AMowing tools
Mowing heads, grass cutting blades and brush knife should just touch the ground.
BCircular saw blades
should "hover" about 8" (20 cm ) above the ground.
When the correct floating position has been reached:
:Tighten down the screw on the carrying ring.
FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R | 33 |