Mounting the Loop Handle
English / USA
4
2
Swiveling the Handlebar
Transport position:
:Release the wing screw (3) and unscrew it until the handlebar (7) can be turned clockwise.
:Turn the handlebar 90° and then swing the handles down.
:Tighten down the wing screw firmly.
Working position:
:Reverse the sequence described above to swing the handles up and turn the handlebar counter- clockwise.
2
1
1
002BA098 KN
Loop Handle with Barrier Bar
:Insert square nuts (1) in the barrier bar (2).
:Line up the holes.
| 3 |
|
| 5 |
|
6 | 7 | KN |
| 002BA099 | |
|
|
:Place the clamp (3) in the loop handle (4) and position them both against the drive tube (5).
:Fit the clamp (6) and place the barrier bar (2) in position.
:Note correct position!
:Line up the holes.
:Insert screws (7) in holes and screw them into the barrier bar as far as stop.
:Go to “Securing the loop handle”.
FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R | 23 |