Approved Power Tool Attachments

STIHL power tool attachments are available for converting the single purpose FS unit into other power tool combinations.

Attachment

Application

 

 

BF 1)

Cultivator

BC 35 1)

Cultivator

1)Barrier bar must be fitted on the loop handle

Mounting the Bike Handle

Removing Clamp Moldings

:Hold the lower clamp (1) and upper clamp (2) firmly.

:Release the wing screw (3).

The clamps are loose once the wing screw has been released. They are pushed apart by the two springs (4 and 5).

:Pull out the wing screw.

Washer (6) remain at the tommy screw .

:Separate the clamps.

Springs (4) and (5) remain in the lower clamp.

English / USA

A

 

7

 

1

250BA046 KN

Mounting the Handlebar

:Place the handlebar (7) in the lower clamp (1) so that distance A is no more than 6 in (15 cm).

:Place the upper clamp in position and hold both clamps together.

:Push the wing screw, with washer, through the two clamps as far as stop – hold all parts together and secure them.

FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R

21