English / USA

Approved Combinations of Cutting Tool, Deflector, Handle

and Harness

Cutting Tools

1STIHL SuperCut 20-2

2STIHL AutoCut 25-2

3STIHL AutoCut 30-2

4STIHL TrimCut 30-2

5STIHL PolyCut 20-3

6STIHL FixCut 25-2

7Grass cutting blade 230-4

8Grass cutting blade230-8

9Brush knife 250

10Scratcher tooth circular saw blade 200

11Chisel tooth

circular saw blade 200

Grass cutting blades, brush knifes and circular saw blades made of any other non-metal material are not permitted.

Deflectors

12Deflector for mowing heads only

13Deflector with

14Skirt and blade for all mowing heads (see ’Mounting the Deflector’)

15Deflector without skirt and blade for all metal mowing tools and brush knife

16Limit stop for circular saw blades

Handles

17Loop handle

18Loop handle with

19Barrier bar

20Bike handle

Harnesses

21Shoulder strap may be used

22Shoulder strap must be used

23Full harnesss may be used

24Full harnesss must be used

Equipment

Among other parts, the complete unit includes:

–Cutting tool

–Deflector

–Handle

–Harness (bike handle unit only)

Select the correct combination from the table according to the cutting tool you intend to use. Read the table horizontally from left to right. Other combinations, e.g. reading the table diagonally, are not permitted.

!Warning!

To reduce the risk of injury from thrown objects and blade contact, never operate your unit without the proper deflector for the cutting attachment being used. To reduce the risk of injury from loss of control

and / or contact with the cutting tool, make sure your unit is equipped with a proper handle and harness for the type of cutting attachment being used.

!Warning!

STIHL brushcutters with a loop handle without barrier bar may be used only with the above mentioned mowing head with nylon line or plastic blades. Other plastic or metal cutting tools, but not circular saw blades, may be used only on brushcutters with a bike handle or loop handle with barrier bar in order to reduce the risk of personal injury through contact with the cutting tool.To reduce the risk of serious injury to the operator or bystanders by kickout, never use a circular saw blade on a brushcutter with a loop handle. Circular saw blades may be used only on brushcutters with a bike handle.

FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R

19