English / USA
8 
14 
15
15
14
15
002BA234 KN
:Place the secured assembly on the handle support (8) with the wing screw at the engine side.
:Push the wing screw into the handle support as far as stop and then screw it down – but do not finally tighten yet.
:Line up the handlebar at a right angle to the drive tube – check dimension A again.
:Tighten down the wing screw firmly
Mounting the Control Handle
:Loosen the screw (9). The nut (10) remains in the control handle (11).
:Push the control handle – throttle trigger (12) must point toward the gearbox – onto the handlebar (7) so that the holes (13) line up.
:Insert screw and tighten down firmly.
250BA002 KN
Fitting the Throttle Cable
Do not kink the throttle cable or lay it in tight radii – make sure the throttle trigger moves freely.
:Press the throttle cable (14) into the retainers (15).
Throttle Cable Adjustment
:Go to chapter "Adjusting the Throttle Cable".
22 | FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R |