Between the knees or thighs

0011BA008 KN

NClamp the rear handle between the knees or thighs

NGrip the handlebar firmly with the left hand – thumb wrapped around the handlebar

Starting

Standard version

0011BA009 KN

NWith the right hand, pull the starter grip slowly until you feel it engage – and then give it a brisk strong pull – simultaneously press down on the handlebar – do not pull the starter rope out all the way – risk of breakage! Do not let the starter grip snap back – guide it vertically back into the housing so that the starter rope can rewind properly

With a new engine or after a long period of disuse, with machines without an additional manual fuel pump, it may be necessary to pull the starter rope several times – to prime the fuel line.

English

Version with Easy2Start

NWith the right hand, pull the starter grip slowly and smoothly – simultaneously press down on the handlebar – do not pull the starter rope out all the way – risk of breakage!

NDo not let the starter grip snap back

– guide it vertically back into the housing so that the starter rope can rewind properly

Starting the chain saw

There must not be anyone within the swivel range of the chain saw.

Version with Easy2Start

0011BA010 KN

NPress the fuel pump bulb at least five times – even if it is still full of fuel

MS 201, MS 201 C

33