English
Starting the chain saw
There must not be anyone within the swivel range of the chain saw.
NPress the button, the decompression valve will be opened
The decompression valve is closed automatically when the engine starts for the first time. For this reason, press the button again before each additional starting procedure.
STOP
0
1
4 | 2 |
| |
3 | NK |
| 219BA039 |
NPush the hand guard (1) forwards – the saw chain is blocked
NSimultaneously press and hold down the throttle trigger lockout (2) and throttle trigger (3) – set master control lever (4) to Start }and simultaneously release throttle trigger and throttle trigger lockout
NHold and start the chain saw
Once the engine is running
STOP
0
1 | KN | |
2 | ||
219BA040 | ||
|
NSimultaneously blip the throttle trigger lockout and the throttle trigger (2); the Master Control lever (1) jumps to the operating position Fand the engine begins to idle
001BA186 KN
NPull the hand guard toward the handlebar
The chain brake is released – the chain saw is ready for use.
Open the throttle only when the chain brake is off. Increased
engine speeds with the chain brake on (saw chain is stationary) will quickly damage the clutch and chain brake.
34 | MS 441 |